|
Our online catalog is being updated! Please contact us for current pricing.
Hanks HM2 Triad e-Gun™
Hanks HM2 Hydra e-Gun
Specifications
| Maximum Power |
6 kW
|
10 kW |
| Crucible
volume |
10 cc |
10/15/40 cc |
| Emission voltage |
7.5 kV |
10 kV |
| Emission current |
0 to 800 mA |
0 to 1.0 A |
| Filament |
700 W | 700 W |
| E-beam deflection |
220°
| 220°
|
| Beam spot size |
.25" diameter |
.25" diameter |
Evaporation
rate
(for aluminum) |
|
1
gm/min at 10 kW
3.6 microns at 25 cm |
| X and Y sweep |
Hyper-Unimelt Sweep (0-200 Hz) |
Hyper-Unimelt Sweep (0-200 Hz) |
| Water |
3.0 gpm/crucible, common return (up to 9 gpm) |
3.0 gpm/crucible, common return (up to 9 gpm) |
| Crucible material |
OFE copper |
OFE copper |
| Bakeout temp |
230°C
(446°F) |
230°C
(446°F) |
| Weight |
14 lbs. (without flange) |
14 lbs. (without flange) |
Mounting Configurations
Each e-Gun is available in three standard mounting configurations:
- e-Gun mounted on a PyraFlat or ConFlat metal-seal type flange, which uses a standard OFE copper gasket
- e-Gun with a 1" diameter bolt-type mount, which mount through a 1" diameter hole, and is sealed by a compression O-ring
- e-Gun alone with no mounting flange
Please specify the mounting configuration at the time the order is placed; the prices listed may not include the bolt-type or flange-type mount.
Other mounting flanges, configurations and geometries are routinely supplied, please call the factory for further information.
Ordering Information
| Model
Number | Power* | Crucible
No. | Price |
|---|
| T0610 | 6kW | 10 cc | $31,500.** |
| T1010 | 10kW | 10 cc | $31,500.** |
| T1015 | 10kW | 15 cc | $31,500.** |
| T1040 | 10kW | 40 cc | $35,500.** |
*This is the power capacity of each crucible, multiply by three to determine the total system power requirement.
**The Triad prices shown are estimates provided for budgetary purposes. Actual prices may be lower or higher, and are dependent upon mounting configurations, system geometry, and utility requirements. Please contact the factory for further information.
|
| |
|
For further information also see:
• Power Supplies
• Controllers and PSC-600 controller
• Accessories
• Crucible Liners
Hanks HM2 e-Guns are manufactured and protected under one or more of the following patents:
Patent No. 4,835,789
Patent No. 4,891,821
Patent No. 4,947,404
|
|