6kW+ e-Gun™ Power Supply

6Kw5-cleaned - Thumb

SPECIFICATIONS:

INPUT VOLTAGE:

  • STANDARD: 180-264Vac, 50/60Hz, THREE (3) PHASE, 90% EFFICIENCY, 0-.85 POWER FACTOR
  • OPTIONAL: 360-528Vac 50/60Hz, THREE (3) PHASE (400Vac) 180-264Vac 50/60Hz, SINGLE PHASE (1PH)

INPUT CURRENT:

  • STANDARD: 180-264Vac, THREE (3) PHASE; 25 amps, MAXIMUM
  • OPTIONAL: 360-528Vac, THREE (3) PHASE; 12.5 amps, MAXIMUM 180-264Vac, SINGLE PHASE; 57 amps, MAXIMUMOUTPUT

VOLTAGE:  19 MODELS FROM 1kV TO 150kV. EACH MODEL IS AVAILABLE WITH POSITIVE OR NEGATIVE OUTPUTS, 1kV TO 10kV UNITS ARE INTERNALLY REVERSIBLE.

LOCAL OUTPUT CONTROLS:  VOLTAGE ADJUSTABLE OVER THE ENTIRE RANGE VIA TEN-TURN POTENTIOMETERS WITH LOCKABLE COUNTING DIALS.

VOLTAGE REGULATION:

  • LOAD: 0.05% OF FULL VOLTAGE +500mV FOR FULL LOAD CHANGE.
  • LINE: 0.05% OF FULL VOLTAGE +500mV OVER SPECIFIED INPUT RANGE.

CURRENT REGULATION:

  • LOAD: 0.05% OF FULL CURRENT 100uA FOR ANY VOLTAGE CHANGE.
  • LINE: 0.05% OF FULL CURRENT OVER SPECIFIED INPUT RANGE.
  • RIPPLE:  0.1% p-p +1Vrms.
  • STABILITY:  0.02% HR. AFTER ONE (1) HOUR WARM-UP.
  • TEMPERATURE COEFFICIENT:  100ppm/ C HIGHER STABILITY (50ppm/ C) AVAILABLE ON SPECIAL ORDER
  • VIA THE HS OPTION.

ENVIRONMENTAL:

TEMPERATURE RANGE:

  • OPERATING: 0 C TO 40 C
  • STORAGE: -40 C TO 85 C

HUMIDITY:  10% TO 90% RH, NON-CONDENSING.

COOLING:  FORCED AIR; INLET THROUGH SIDE PANELS, OUTLET AT REAR OF PANEL.

METERING:  DIGITAL VOLTAGE AND CURRENT METERS, ACCURATE TO WITHIN 1%

SYSTEM STATUS DISPLAY:  "DEAD FRONT" TYPE INDICATORS PROVIDE STATUS OF UP TO TWELVE (12) SYSTEMS
OPERATIONS INCLUDING VOLTAGE AND CURRENT REGULATION, FAULT CONDITIONS AND CIRCUIT CONTROL.

ANALOG INTERFACE CONNECTOR:  FIFTY (50) PIN FEMALE D CONNECTOR

WEIGHT: <100 lbs.


Call or email with your requirements and for current pricing.

800.962.2310 / sales@thermionics.com