IC Series 15kW e-Guns™

Thermionics’ ICR e-Gun™ is available with capacity up to 1500cc in a carousel configuration as pictured here or as a multi-pocket e-Gun™ with up to 10 each 75cc crucibles.

ICRe_gun2-cleaned-thumb

Features

  • True XY sweep with full crucible coverage
  • Proprietary anti-beam curl shield for longer more productive runs.
  • Rugged drive mechanism to prevent jamming
  • Plug-in emitter module
  • Enhanced high-stability cooling
  • Built in cross-contamination shielding (multi-pocket version)
  • Easy access (without disassembly) to magnetic adjustments
  • Optional increased run-time features: differential pumping, gas bleed and dual filaments

Specifications

  • Operating pressure:  Below 5 x 10-5 Torr is desirable for best operation
  • Beam voltage:  10,000 VDC
  • Beam current:  0-1500 mA continuously variable
  • Maximum power:  15 kW
  • Cooling water:  3.5 gpm
  • Pressure differential:  25 psi minimum
  • Maximum bakeout temperature:  130°C
  • Crucible volume:  Up to 1500cc Carousel or up to 10 x 75cc multipocket

12kW e-Gun™ Power Supply

12Kw2-cleaned - Thumb

SPECIFICATIONS:

INPUT VOLTAGE:

  • STANDARD:  180-264Vac, 50/60Hz, THREE (3) PHASE, 90% EFFICIENCY, 0-.85 POWER FACTOR
  • OPTIONAL:  360-528Vac 50/60Hz, THREE (3) PHASE (400Vac)

INPUT CURRENT:

  • STANDARD:  180-264Vac, THREE (3) PHASE; 50 amps, MAXIMUM
  • OPTIONAL:  360-528Vac, THREE (3) PHASE; 25 amps, MAXIMUM

LOCAL OUTPUT CONTROLS:  VOLTAGE ADJUSTABLE OVER THE ENTIRE RANGE VIA TEN-TURN POTENTIOMETERS WITH LOCKABLE COUNTING DIALS.

VOLTAGE REGULATION:

  • LOAD: 0.05% OF FULL VOLTAGE +500mV FOR FULL LOAD CHANGE.
  • LINE: 0.05% OF FULL VOLTAGE +500mV OVER SPECIFIED INPUT RANGE.

CURRENT REGULATION:

  • LOAD: 0.05% OF FULL CURRENT 100uA FOR ANY VOLTAGE CHANGE.
  • LINE: 0.05% OF FULL CURRENT OVER SPECIFIED INPUT RANGE.

RIPPLE:  0.3% p-p +1Vrms. LOWER RIPPLE AVAILABLE VIA SPECIAL ORDER.

STABILITY:  0.02% HR. AFTER ONE (1) HOUR WARM-UP.

TEMPERATURE COEFFICIENT:  100ppm/ C HIGHER STABILITY (50ppm/ C) AVAILABLE ON SPECIAL ORDER VIA THE HS OPTION.

ENVIRONMENTAL:

TEMPERATURE RANGE:

  • OPERATING:  0 C TO 40 C
  • STORAGE:  -40 C TO 85 C

HUMIDITY:  10% TO 90% RH, NON-CONDENSING.

COOLING:  FORCED AIR; INLET THROUGH SIDE PANELS, OUTLET AT REAR OF PANEL.

METERING:  DIGITAL VOLTAGE AND CURRENT METERS, ACCURATE TO WITHIN 1%

SYSTEM STATUS DISPLAY:  "DEAD FRONT" TYPE INDICATORS PROVIDE STATUS OF UP TO TWELVE (12) SYSTEMS
OPERATIONS INCLUDING VOLTAGE AND CURRENT REGULATION, FAULT
CONDITIONS AND CIRCUIT CONTROL.

DIGITAL INTERFACE:  ETHERNET AND RS-232 DIGITAL INTERFACE IMPLEMENTED WITH TWELVE (12) BITS OF
RESOLUTION, A VB GUI IS PROVIDED.

ANALOG INTERFACE CONNECTOR:  FIFTY (50) PIN FEMALE D CONNECTOR

WEIGHT:  <100 lbs.

Call or email with your requirements and for current pricing.

800.962.2310 / sales@thermionics.com