e-Guns™ and e-beam systems since 1958

World-class electron beam guns.

Thermionics – your engineering partner from concept to success.

Reliable electron beam evaporation sources designed for consistent deposition performance, backed by decades of experience, application expertise and direct engineering support.

Thermionics e-Gun electron beam source
195865+ years building UHV hardware
160e-Gun™ products and accessories
Hayward, CADesigned and built in-house
WorldwideAsia-Pacific · Europe · Americas
At a glance

The Thermionics Advantage

Superior technology and engineering support from Thermionics.

  1. 01

    Consistent beam performance

    Consistent film thickness and properties, and day-to-day process consistency, including deposition rate.

  2. 02

    UHV-engineered construction

    Built for ultra-high vacuum, for purer, more uniform thin films.

  3. 03

    In-house engineering and manufacturing

    Decades of engineering experience, partnering with you from idea through operation and production.

  4. 04

    Long-term service and support

    Repair, rebuild and upgrade services that keep your e-Guns™ performing for years.

Customer benefits

How a Thermionics e-Gun™ benefits your application.

Thin-film composition and properties

First-rate uniformity and purity, layer after layer.

Thin-film deposition process

Performance and process consistency, run after run.

Applications

Thermionics has supported a wide range of standard and demanding applications, from laboratory to production.

Reliability

Our systems stand the test of time, delivering dependable performance year after year.

Operating range

From high vacuum to ultra-high vacuum.

Thermionics e-Guns™ operate at any pressure below 1×10⁻⁴ Torr. HV and UHV models are available, with fully UHV-compatible components such as our sweep coils.

Operates below
1×10−4 Torr
UHV models rated to
2×10−11 Torr

Designed and built in Hayward since 1958.

In-house engineering, welding, vacuum furnace brazing, coil and transformer manufacturing, and source testing, all under one roof.

Request a quote
Competitive advantages

Why Thermionics?

01

Leaders in e-beam innovation

Thermionics pioneered linear and industrial-capacity e-Guns™.

  • HM2 e-Gun™For high-volume evaporation.Thermionics exclusive technology
  • Hydra™ e-Gun designs and Hanks magnet technologyHigh-capacity deposition, multi-material deposition and superior beam characteristics.Thermionics exclusive technology
  • Linear e-Guns™Design flexibility for your deposition equipment.
  • Industrial rotary e-Guns™Large crucibles enable larger-scale production.
02

Superior design and UHV-compatible components

For thin-film uniformity and purity.

  • Magnetic-system designEngineered for stable beam positioning and serviceability during routine maintenance.
  • UHV constructionSweep coils built with vacuum-compatible materials and sealed enclosures, and helium leak tested.
  • Beam controlA multiple-dipole magnetic design that maintains consistent beam density as the beam sweeps across the crucible, for even heating of the source material and a steadier evaporation rate.
03

An engineering partner with decades of experience

Customers work directly with the engineers who design and manufacture our products, from initial product selection and integration through ongoing support.

Less trial and errorThe expertise to help you build a system with a minimum of trial and error.
Customizatione-Guns™ optimized for your system.
Engineering partnershipDirect, responsive access to experienced engineers, application-specific solutions and ongoing technical support.
Long-term supportRepair, rebuilding and upgrade services for Thermionics equipment, plus repair support for compatible equipment from other manufacturers.
Manufacturing expertise
  • In-house welding
  • Vacuum furnace brazing
  • Coil and transformer manufacturing
  • Source testing
  • Enhanced vacuum integrity
  • Consistent e-Gun™ source operation
  • Enhanced process reliability and repeatability
  • Expanded support for custom engineering solutions
For system builders

Building or upgrading your deposition system?

Whether you’re building new deposition systems or upgrading existing equipment, we help you select the right e-Guns™, components and accessories and integrate them into your platform. One engineering team stands behind the source, the power supply and the sweep controller.

Discuss your system
  • Consistent from unit to unitThe same source performance in every system you ship.
  • Integration supportMounting, power and controls for new builds or existing chambers, worked out with the engineers who build the source.
  • Parts for your installed baseReplacement parts and rebuild kits, so your customers’ systems keep running.
Source finder

Not sure which source you need?

What do you need?
Download the full decision tree (PDF) →
Your starting point
Answer one or two questions.

You’ll get a source type or parts recommendation. An engineer verifies it against your chamber before quoting.

The e-Gun™ lineup

Three source types, one engineering team behind them

Linear
Hanks HM2 Hydra, Dynamic Source e-Gun

Linear Hydra™ e-Gun™

Compact arrays of crucibles and emitters that translate linearly, for co-deposition of up to six materials in a single pumpdown.

Shown: Hanks HM2 Hydra, Dynamic Source e-Gun™
Heritage

Pioneers in linear e-beam technology

Thermionics pioneered linear e-beam technology and continues to advance the field with the Linear Hydra™, offering a broad range of crucible and emitter configurations for multi-material co-deposition.

Capacity

Industrial-capacity e-Guns™

Engineered for demanding production and research applications, with power levels up to 12 kW and crucible capacities up to 867 cc.

e-Gun™ systems

e-Guns, power supplies, beam sweep controllers and related components, matched to each other and supported by one engineering team.

Ask about e-Gun™ systems
THE FULL THERMIONICS CATALOG

Beyond e-Guns™, Thermionics designs and builds UHV chambers, valves, feedthroughs and the components around them.

Hayward, California

One engineering team, from fit check to the next rebuild kit

The team that designs and builds your source, with over 75 years of combined e-beam experience, is the same team that helps you select it and supports it after installation.

Charles Farrow and Bryan Mendes of Thermionics Laboratory Built in Hayward since 1958
Talk with the people who build your source. No call center between you and engineering. 1-888-372-2283
Charles Farrow (left) and Bryan Mendes
  1. 01
    Review your application
    Your materials, chamber, process and goals.
  2. 02
    Verify fit and specs
    Mounting, power, pockets, crucible size.
  3. 03
    Quote and delivery
    Estimated lead times for single units or ongoing OEM supply, US or international.
  4. 04
    Parts and support
    Replacement parts and the same engineering team.

Common questions

Which e-Gun™ do I need?

It mostly depends on how many materials you deposit per run and on your chamber. For several materials without venting, a multi-pocket source. For one material, a single-pocket source. Send your chamber model and materials and our engineers will verify the fit.

Can you help with new systems and upgrades?

Yes. We help equipment builders select e-Gun™ sources, power supplies, sweep controllers and accessories for new systems and for upgrading existing equipment, support mounting, power and controls integration, and supply replacement parts for the systems you’ve shipped.

Do you offer replacement parts?

Yes. Our e-Gun™ line includes 160 products and accessories, including emitters, filaments, crucible liners, cathodes, shutters, sweep coils and rebuild kits. Ask about availability when you request a quote.

Do you ship internationally?

Yes. Partners provide local sales and support in China (DE Tech), Japan (R-DEC) and France (Neyco / HEF Group).

What’s the warranty?

Thermionics products are covered by our standard product warranty. Read the warranty terms (PDF).

What are typical lead times?

Lead times depend on the source and configuration. Every quote includes an estimated lead time for new sources and for parts.

Discuss your application with an e-beam engineer.

Share your materials, chamber and process, or the system you’re building. Our engineering team will respond with a recommendation and a quote.

Sales and applications engineering
1-888-372-2283