TLI is committed to minimizing the transmission of COVID-19. We are open for business while taking this pandemic seriously. Learn more about our COVID-19 response here: LEARN MORE

10 kW Power Supply

Pictures, Models & Step File Downloads

View Downloads

10 kW Power Supply

SKU SVA-10 Categories , Tag


Solid State Power 10kW @ -10kV, 3 Phase, 50/60Hz Specify 208V or 400VAC Input Power Maximum Emission is 1.0 Amp Output Voltage Variable from 0 to -10kV NO SWEEP


Product Manual:

View Manual


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


Introduction The Thermionics Laboratory e-GunTM, an electron beam evaporation source, is used to produce uniform high-purity films and optical coatings. The compact design and ease of maintenance make it useful in practically all vacuum systems and for many varied applications. It has been used to evaporate refractory and dielectric materials, as well as the more common conductive and semi-conductor

Learn More »

Evaporating Aluminum in an e-Gun™ source

Application Note: Evaporating Aluminum in an e-Gun™ source Aluminum (Al) is highly reactive when molten. Al will react with all liner materials. Al also getters Oxygen to form oxide layers if any oxygen is present during deposition. Aluminum Oxide (Al2O3) has a much higher melting point and vapor pressure when compared to Al (2,045C M.P., 1550C V.P. for Al2O3

Learn More »

Evaporating Gold in an e-Gun™ source

Application Note: Evaporating Gold (Au) in an e-Gun™ source For Gold, the best liners are Coated Graphite and Intermetallic (Ti doped BN). You should not sweep during coating. You can sweep during material conditioning, but once the material is fully melted, just place the beam in the center of the pocket. This will give the best stability. You can

Learn More »

Evaporation Table

NAME SYMBOL MELTING POINT 0˚C DENSITY g/cc 10^-8 TORR 10^-6 TORR 10^-4 TORR LINER NOTES N=INDEX OF REFRACTION Aluminum Al 660 2.70 677 821 1010 BN, CG Alloys and wets May fill volume 70%  (1) Aluminum Carbide Al4C3 1400 2.36  800 N=2.7 (3) Aluminum Floride AlF3 1257 Subl. 3.07 410 Subl. 490 Subl. 700 Subl. G, W, MO N=1.38

Learn More »

Ground System for e-Guns™

The ground system is a very important aspect of the installation of the electron beam equipment. The vacuum tank and the power supply must be connected to a good earth ground. Under normal conditions, a good earth ground will consist of a ¾ inch diameter copper-clad rod driven into the floor at the vacuum tank location. It should be

Learn More »