TLI is committed to minimizing the transmission of COVID-19. We are open for business while taking this pandemic seriously. Learn more about our COVID-19 response here: LEARN MORE

RNN™-600 SERIES

Pictures,
Models & Step File Downloads

View Downloads

Clear

RNN™-600 SERIES

SKU N/A Categories , Tag

Description


RNN™ Series Differentially Pumped Rotary Seal

Differentially pumped rotary seals (RNNs) provide 360° of continuous rotary freedom through the vacuum wall of a UHV system. The RNN has two stages of differential pumping isolated by graphite-impregnated, expanded, Teflon® seals on special sealing surfaces. A preloaded ball bearing set accurately controls the rotating stage position.

rnn600

RNNs are available with a worm drive fine adjust option. This allows for easier and more accurate angle adjustment. RNNs are also available with anti-backlash stepping or synchronous motor drive.

RNNs with up to 12″ I.D. are listed. Larger I.D.s have been built with excellent performance. Please consult factory for special applications.

Specifications

  • Models with clear inside diameters of 1.53″ to 12″ standard, larger sizes on request
  • Bakeable to 150°C
  • Stationary and rotation flanges, tapped
  • Thickness approximately that of two ConFlat-type flanges
  • 2 stage differentially pumped
  • Base pressures in 10-11 Torr range
  • 0–360° scale with Vernier, standard

Typical Performance Specifications for RNN-400 and larger models

  • Resolution:      <0.004°
  • Repeatability:  <0.008°
  • Backlash:        <0.035°

Readability Specifications

  • Standard scale: 1.0°
  • Mechanical counter: 0.1°
  • Microstepped motor drive required for maximum resolution

Options

  • Fine adjust worm drive
  • Digital read-out on fine adjust, 0.1° read-out, mechanical, nonresetable
  • Mechanical counter option available
  • Anti-backlash stepping motor drive 0.018° per full step (0.0225°/full step on RNN-150/MS), with manual knob
  • Custom pumpout tube lengths and crank shaft lengths on /FA units available

Payloads

The standard maximum payloads are listed below. Larger loads may be handled under specific applications. Please consult the factory for custom applications.

  • The center of gravity of the payload is within “X” of the polar axis of the unit, where X is equal to 10% of the RNN I.D.
  • The center of gravity of the payload is within “Y” distance of the rotating flange on the horizontal mounted units, where Y is the flange I.D.
  • The overall maximum size “A” of the payload outside vacuum is:
    Vertical operation: 7 x flange O.D.    Horizontal operation: 5 x flange O.D.    Inverted operation: 7 x flange O.D.
Model No. Vertical Horizontal Inverted
RNN-150 54 lbs 30 lbs 45 lbs
RNN-250 90 lbs 38 lbs 70 lbs
RNN-400 144 lbs 66 lbs 110 lbs
RNN-600 180 lbs 84 lbs 140 lbs
RNN-800 200 lbs 91 lbs 160 lbs
RNN-1000 370 lbs 160 lbs 280 lbs
RNN-1200 430 lbs 200 lbs 350 lbs

 

Payload Location

 

Table 1. RNN Series Differentially Pumped Rotary Seals

rnn_1_large-cleaned

(includes a removeable adjustment wrench)

I.D. Flange
O.D.
A B C D E F G H Model
No.
1.53 2.75 4.50 2.99 1.0 3.18 2.75 .49 .13 60° RNN-150
1.53 2.75/6 1 6.00 2.99 1.34 3.33 2.75 .15 .13 45° RNN-150/6
2.53 4.5 5.75 3.64 1.36 3.58 4.50 .49 .03 45° RNN-250
2.53 4.5/6 1 6.00 3.64 1.52 3.71 4.50 .33 .03 45° RNN-250/6
4.03 6 7.75 4.57 1.68 4.34 6.02 .37 .06 45° RNN-400
6.03 8 10.25 6.16 1.74 5.70 8.00 .42 .13 54° RNN-600
8.00 10 12.05 7.03 1.94 6.70 10.00 .42 .13 45° RNN-800
10.00 13.25 15.75 8.81 2.37 8.50 13.28 .29 .13 24° RNN-1000
12.00 14 20.00 3.34 RNN-1200

Dimensions in inches
1 Signifies mounting flange sizes respectively

Table 2. RNN/FA Differentially Pumped Rotary Seals with Fine Adjust 1

rnn_2_large

I.D. Flange
O.D.
A B C D E F G H I Drive
Ratio
Model
No.
1.53 2.75 5.13 3.38 1.00 4.95 2.75 .49 0.37 60° 3 80:1 RNN-150/FA
1.53 2.75/6 2 6.00 3.84 1.34 5.32 2.75 .15 0.37 45° 3 100:1 RNN-150/6/FA
2.53 4.5 6.38 4.20 1.36 6.11 4.50 .49 0.41 45° 3 100:1 RNN-250/FA
2.53 4.5/6 2 6.38 4.20 1.52 6.11 4.50 .33 0.41 45° 3 100:1 RNN-250/6/FA
4.03 6 8.50 8.25 1.68 9.28 6.02 .37 0.54 45° 4 100:1 RNN-400/FA
6.03 8 10.25 8.50 1.74 9.93 8.00 .42 1.10 54° 5 100:1 RNN-600/FA
8.00 10 12.75 9.56 1.94 11.50 10.00 .42 1.10 45° 5 100:1 RNN-800/FA
10.00 13.25 17.00 11.86 2.37 17.25 13.28 .29 .91 24° 7 100:1 RNN-1000/FA
12.00 14 Consult Factory RNN-1200/FA

Dimensions in inches

1 The fine adjust units utilize worm drive and are dynamic anti-backlash on RNN-400 and larger models. They come with large knobs and crank handles.
2 Signifies mounting flange sizes respectively

Table 3. RNN/MS or /MY Differentially Pumped Rotary Seals with Anti-Backlash  /MS Stepping or /MY Synchronous Motor Drive  1

rnn_3_large

I.D. Flange
O.D.
A B C D E F G H I Drive
Ratio
Model
No.
1.53 2.75 5.13 10.00 1.00 9.97 2.75 .49 0.74 60° 3.39 80:1 RNN-150/MS or /MY
1.53 2.75/6 2 5.13 10.00 1.34 9.97 2.75 .15 0.74 45° 3.39 100:1 RNN-150/6/MS or /MY
2.53 4.5 6.38 10.10 1.36 8.30 4.50 .49 0.41 45° 3.39 100:1 RNN-250/MS or /MY
2.53 4.5/6 2 6.38 10.10 1.52 8.30 4.50 .33 0.41 45° 3.39 100:1 RNN-250/6/MS or /MY
4.03 6 8.50 9.77 1.68 11.69 6.02 .37 0.54 45° 3.39 100:1 RNN-400/MS or /MY
6.03 8 10.20 10.13 1.74 11.69 8.00 .42 1.10 54° 3.39 100:1 RNN-600/MS or /MY
8.00 10 12.75 11.39 1.94 11.69 10.00 .42 1.10 45° 3.39 100:1 RNN-800/MS or /MY
10.00 13.25 Consult Factory RNN-1000/MS or /MY
12.00 14 Consult Factory RNN-1200/MS or /MY
18.00 24 Consult Factory RNN-1800/MS
24.00 34 Consult Factory RNN-2400/MS

Dimensions in inches

1 The motor drive units utilize worm drive and are all dynamic anti-backlash with hand knobs at the rear of the motor
2 Signifies mounting flange sizes respectively

Options

Mechanical Counter

  • Add digital read-out to fine adjust or motor drive unit
  • 0.1° read-out, mechanical, nonresetable
  • Viewable from the side
  • Solution to difficulty caused by equipment mounted to platform obstructing view of degree scale
  • When /MC option is selected the Vernier scale is not included

Valve Manifold System

  • Allows first stage pump to evacuate second stage pump
  • Includes: two modified 1.33″ O.D. flange nipples; BVV-025 bakeable valve; flexible metal plumbing
  • Assembled on RNN platform

2 l/s Appendage Ion Pump Assembly

  • Use with valve manifold system
  • Allows continuous pumping of RNN
  • Includes Alnico magnet
  • Requires ion pump control unit

Ion Pump Control Unit

  • For use with 2 l/s appendage ion pump assembly
  • Power input: 115 VAC, 60 Hz or 230 VAC, 50 Hz (specify with order)
  • Power output: 5 kV DC
  • Includes HV coax cable and power cord

Additional information

Flange Detail

TAPPED, TAPPED METRIC

Drive

STANDARD, FA, MS

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.